Active Ηχεία ALESIS M1 AKTIV MK2

Ηχεια ενεργά μάρκας ALESIS M1 AKTIV MK2 λίγες ώρες λειτουργίας και ενασχόλησης με μουσικές παραγωγές…

Product Model: M1 ACTIVE MK
Manufacturer: ALESIS

Professional Accuracy, Clarity, and Performance in an Affordable Powered Monitor

By combining our expertise in reference monitor design with our proven track
record in studio amplification, Alesis’ new M1 Active Biamplified Reference
Monitor offers the incredibly accurate response that perfectly translates to every
playback system. Its internal active crossover and custom-designed dual amplifiers
ensure an extremely consistent performance under a variety of different studio
conditions and program material. The result is a broad, extremely flat frequency
response, clear imaging with a wide sweet spot, high power handling, and detailed
high- and mid-frequency response that only a professional powered monitor can deliver.
Custom Drivers Designed for Active Monitoring
The M1 Active’s woofer and tweeter were specifically designed for the most linear,
low distortion response in powered monitoring applications. Its 6.5 inch woofer cone
is formulated from non-woven carbon fiber. It’s a material that has been used for the
skins of combat aircraft wings, since it offers high tensile strength and low weight.
In fact, carbon fiber is 25% lighter than polypropylene (the most common driver material)
and hence provides quicker transient response in the low frequency range for superb
bass response as well as a vast improvement in the detail of critical upper-mid frequencies.
The M1 Active’s inch tweeter dome is made of pure silk, which offers a natural response
that aids in preventing ear fatigue during long mix sessions. It also features an internal
pole piece mounted phasing plug and is ferrofluid cooled to maintain the best balance
of transient response to power handling.
Active Bi-Amplifiers and Electronic Crossovers
Two audiophile-quality amplifiers ? a 75 watt woofer amp and a 25 watt tweeter amp ?
were developed for the M1 Active, along with 8th order high- and low-pass electronic
crossover filters. The crossover point was carefully chosen at a low 1500Hz, and produces
an extremely wide dispersion zone as well as low midrange coloration. Also, the special
time alignment circuitry that’s been added to the tweeter section of this crossover allows
the output of frequencies from the high and low drivers to occur in perfect synchronization,
avoiding the time smear that’s typical in less advanced powered speakers.
Attractive Cabinet Design with Dual Ports and Offset Tweeter
In developing the M1 Active, the Alesis engineering team discovered that dual font-mounted
ports provided the fastest, most coherent and extended low frequency augmentation. Also,
the unique offset design of the high frequency driver allows for the flattest frequency and power
response in a speaker that offers such wide dispersion. The M1 Active’s attractive mirror-imaged,
charcoal-toned cabinet and magnetically-shielded drivers allow for placement in close proximity
with computer or video monitors, and offers the added benefit of blending beautifully into your
studio’s decor without being obtrusive. They may be mounted in either a horizontal or vertical
placement to best fit your studio’s requirements.
The Alesis M1 Active
With the lineage of our TEC Award-winning Monitor Onet Studio Reference Monitor,
Alesis speakers have already become a standard in project and professional studios
around the world. If you’re looking for the same great accuracy and detailed response
in a powered system that’s truly affordable, the answer is clear: the new M1 Active f
rom Alesis.

Technical Description:
Low Frequency Driver: 6.5 in. non-woven carbon fiber with Santoprene
surround and dual magnet shielded configuration
High Frequency Driver: 1 in. silk dome with medium viscosity ferrofluid
coolant and dual magnet shielded configuration
Crossover: 1500Hz, 8th-order, 48dB/octave filters
Input Impedance: 20k_ balanced, 10k_ unbalanced
LF Filter: 2nd order, “optimal Q” high pass, +1dB boost@50Hz
LF Amplifier: 75 watts, 8_ load
LF Amp Distortion: less than 0.03% thd @ 30w lf amp slew rate:<>19V/?sec
LF Amp S/N Ratio: >110dB, ref. 60W @ 8_, A-wtg., 1kHz
HF Amplifier: 25 watts, 4_ load
HF Amp Distortion: less than 0.06% thd @ rated power
lf amp slew rate less than 9V/?sec
HF Amp S/N Ratio: >112dB @ rated output
Frequency Range: 38 Hz - 23.5 kHz (-10dB point)
Connectors: Combination XLR-1/4 in. jack with input level control
Dimensions (H x W x D): 15 x 8.5 x 9.75 in. (216 x 381 x 248 mm)
Weight: 8.9 kg(19.5 lbs.)

λεπτομερειες για τα Ηχεια !!!

πωλούνται 220 ευρό


δεκτός κάθε έλεγχος…:wink:


SOLD !!!